Description
In Set:
- Contactless switching – Hands-free, hygienic, flexible, clean walls
- Plug-n-Play – fast, wire-free installation
- Extremely low energy consumption – energy efficient, environmentally friendly device
- Compatible, multi-functional and maintenance-free – broad application field
Eltako wireless actuator, impulse switch FSR61NP-230V:
- Low self-consumption (< 0,8 W) – energy efficient power adaptor
- Repeater-function – Extend the wireless range of other EnOcean®-compatible products
- Individual transmitter-parameters– individual functions for each transmitter
- Variable operation modes – Relay switches, impulse switches, timers
After installation of the wireless actuator by a qualified electrician, the supplied PicoWave and any other EnOcean® compatible switches or sensors (max 35) can be taught in, in seconds. An individual function can be selected for each transmitter. The following functions and operating modes can be selected:
PicoWave functions
- Universal switch
- Central off
- Central on
PicoWave operation modes
- Relay switch (with safety timer)
- Impulse switch (also with continuous light function and or switch-off warning)
In addition, the actuator can be used with other compatible components for the following functions
- Scene button
- Directional switch
For example, after teaching the EnOcean® proximity switch PicoWave, it can be used as a universal toggle switch, you can turn the consumer controlled by the actuator on and off by simply “waving” or “approaching” the switch with your hand, to do this, the actuator should be set to ESV mode and the lower rotary switch is set to ∞ (continuous). If a time value is set, you can also switch on the consumer by “waving” or “approaching” with your hand. However, the power supply to the connected load will be automatically switched off after the selected runtime has expired or interrupted by another hand gesture. A new “wave” or “approach” during the runtime switches the consumer either off again.
In addition to the Eltako wireless actuator FSR61NP-230V included in this set, there are a variety of other EnOcean® capable actuators in various designs (e.g. Smart Plugs for mains outlets) that you can teach and “wave” with the PicoWave. A few application examples, as well as information on the integration possibilities of the two products in existing EnOcean® alternative systems can be found under the “Compatibility” sub-menu.
WEEE-Nr.: DE48986370
Areas of application
The actuator is intended for indoor use only. It may only be installed by a qualified electrician, as otherwise there is a risk of fire or electric shock. Information on consumer loads can be found in the “Technical Data” sub-menu, amongst other things.
The PicoWave can be used both with the Eltako FSR61NP-230V wireless actuator, and also in combination with other EnOcean compatible receivers in the following application areas:
- Private houses & apartments
- Office buildings
- Department stores & shops
- Public buildings
- Hospitals
- Hotels
- Kitchens & Restaurants
- Other areas with high hygiene standards
Application examples
The combination of the PicoWave with the actuator is already used in various installations as a:
- Light switch
- Mains shut off switch
- Presence detector
- …
The PicoWave together with the actuator and other products from the PicoControls family are particularly suitable for retrofits, renovations and in listed buildings.
Eltako wireless actuator FSR61NP-230V:
The actuator can control consumers in a 230V network with a consumption of up to 2000W. For more detailed information on the switching performance for halogen lamps, motors or other non-ohmic loads, please refer to the “Technical Data” sub-menu or the manual of the Eltako FSR61NP-230V wireless actuator.
All proximity switches from the Picosens PicoControls series can be used to control the actuator. In addition, there are also numerous other EnOcean®-compatible switches and sensors that are compatible with the Eltako FSR61NP-230V wireless actuator.
PicoWave: EnOcean® Actuators
Below you will find an example list of EnOcean® actuators that you can use to switch different consumers and devices with the PicoDot.
A list of all EnOcean® actuators that we have tested, including instructions for setting the function modes for learning the PicoWave, can be found at picosens.de/EnOcean.
| Hersteller | Artikel | Beschreibung | Bauart |
| Eltako | FSB61NP-230 V | Control for roller shutters, internal and external blinds | Flush wall |
| Eltako | FSR61/8-24 V UC | Impulse, relay switch (potential free) | Flush wall |
| Eltako | FSR61-230 V | Impulse, relay switch (potential free) | Flush wall |
| Eltako | FSR61NP-230 V | Impulse, relay switch | Flush wall |
| Eltako | FUA12-230 V | Universal wireless actuator | DIN Rail |
| Eltako | FUD61NPN-230 V | Universal dimmer switch | Flush wall |
| Flextron | 300816-230 V | Multi receiver, 1 channel | Flush wall |
| Jäger Direkt | 563.010 | 1 channel bridge for lighting control | Switch |
| Peha | D 451 FU-EBI O.T. | 1 channel receiver | Flush wall |
| Peha | D 4511 FU-EBIM ST | Mains socket adaptor | Mains socket |
| Thermokon | STC-DO Blind 230 V | Receiver for shutters and blinds | Flush wall |
| Thermokon | STC-DO Light 230 V | 2 channel receiver | Flush wall |
| Trio2sys | 10020068 | 1 channel receiver 16A | DIN Rail |
| Trio2sys | 10020069 | 1 channel receiver 10A | DIN Rail |
| Trio2sys | 10020071 | 2 channel receiver 5A | DIN Rail |
| Trio2sys | 10020092 | Receiver with remote control and timer | DIN Rail |
Integration into existing systems
The actuator and also the PicoWave can also be integrated into existing building control systems via so-called gateways. There are various gateways that translate EnOcean® communication into home automation systems such as KNX, DALI, … or other common bus systems such as USB. For the home automation area, EnOcean® over WLAN gateways are also interesting.
| Details | Eltako Funkaktor FSR61NP-230V |
| Switching capacity according to load type | |
| Light bulbs | 2000 W |
| Halogen lamps | 2000 W |
| Fluorescent lamps | 500 VA - 1000 VA |
| Compact fluorescent lamps | 15 x 7 W / 10 x 20 W |
| Technische Daten | Eltako Funkaktor FSR61NP-230V |
| Power supply | 230 V~ / 50 Hz |
| Connection | Screw terminals |
| Self-consumption standby | <0,8 W (active power) |
| Wireless communication | EnOcean® Equipment Profiles (EEP: F6-01-01and others) |
| Wireless frequency | 868,3 MHz |
| Wireless range | Bis 30 m (abhängig von örtlichen Gegebenheiten) |
| Transmission power | max. 10 mW |
| Temperature range | - 20° C bis + 50° C |
| Storage temperature range | - 25° C bis + 75° C |
| Dimenions | 45 mm x 45 mm x 33 mm (L x B x H) |
| Weight | 36 g |
| Approvals | CE |
| Technical Data | PicoWave im NOVA-Design by Honeywell PEHA |
| Reaction distance | 100 mm (Referenz Hand) |
| Measurement principle | Infrared impulse reflection |
| Wave length: 850 nm, Impulse cycles: 10 x per second | |
| Extraneous light immunity*: | Up to 150.000 Lux (= 1.5 times sunlight) |
| *Full function even in direct sunlight | |
| Wireless communication | EnOcean® Equipment Profile (EEP: F6-01-01) |
| Wireless frequency | 868,3 MHz |
| Wireless range | Up to 30 m (dependent on local environment condition) |
| Max. Output power | 3 dBm |
| Power supply | 3V button cell battery (Type: CR2032) |
| Power consumption | 320 nA (in standby modus) |
| Battery life expectancy*: | 100 switching cycles/day = 30 years |
| 1000 switching cycles/day = 10 years | |
| 2000 switching cycles/day = 5 years | |
| *We recommend quality batteries from well-known manufacturers | |
| Temperature range | - 20° C bis + 50° C |
| Protection class | IP21 |
| Dimensions | 85,00 mm x 85,00 mm x 13 mm (L x B x H) |
| Frame design | Combination frame in NOVA-Design by Honeywell |
| Colour | Pure white high shine |
| Colour | Piano black high shine |
| Colour | Alu |
| Colour | Jade pure white |
| Colour | Oak pure white |
| Colour | Wenge (wood) piano black |
| Weight | Depending on the variant, approx. 100 g (incl. battery) |
