PicoWave – Optical proximity switch for the wall & Peha Easyclickpro main adaptor

In Set

• Contactless switching  – Hands-Free, hygienic, flexible, clean walls…
• Plug-n-Play – fast, wire free installation, connected in seconds
• Extremely low energy consumption – environmentally friendly, maintenance free
• Extraneous light independent, self-calibrating, robust, mobile, compatible – broad application field, …

Peha Easyclickpro mains adaptor:

• Low self-consumption (< 0,5 W) – energy efficient power supply and bistable relay
• Smart Submetering – Energy consumption measurement of the connected consumer
• Repeater-function – Extend the wireless range of other EnOcean® compatible products
• Individual transmitter-parameters– individual functions for each transmitter
• Pre-configured functions – Already assigned functions/parameters for various transmitters
• Certified product safety – KEMA Certified

Simply insert the Easyclickpro mains adapter into a standard CE mains socket and then insert the desired consumer to be switched into the adapter. After teaching the supplied PicoDot and any other EnOcean® compatible switches or sensors (max 32), you can switch the connected consumer according to its respective individual parameterization. This means that a function can be selected individually for each learned transmitter. The following functions and parameters can be selected:

PicoDot functions

• One-touch operation (switch, switch on, switch off)
• Switching (impulse)
• Time switch with selectable runtime
• Staircase lighting with selectable running time and switch-off warning

In addition, the mains adapter can be used in combination with other components for the following functions

• Switching operation ON / OFF (standard function)
• Hotel card switch with selectable duration time
• Ventilation function with delayed ON and with selectable duration time
• Lighting control
• Window and window handle contact monitoring
• Motion detector and light sensor

After teaching the EnOcean® proximity switch PicoWave in “One-Touch” mode (function 2, mode 2) you can for example, switch the consumer plugged into the adaptor on and off with a simple “wave” or “approach” of the hand.

If you select for example the timer mode, you can switch the consumer on by “waving” or “approaching” with your hand. After expiration of the selected running time, the power supply to the connected consumer is switched off automatically, while a new “wipe” or “approach” resets the run time.

In addition to the Peha Easyclickpro mains adaptor included in this set, there are a variety of other EnOcean® capable actuators in various designs (e.g. Smart Plugs for mains outlets, wall enclosure relays) that you can teach and “waven” with the PicoWave. A few application examples, as well as information on the integration possibilities of the two products in existing EnOcean® alternative systems can be found under the “Compatibility” sub-menu.

Energy saving

Built in the NOVA design case, the optical proximity switch has been designed specifically for extremely low power consumption. The calculated life expectancy of the battery with a normal switching cycle of a typical light switch is approximately 70 years. That batteries today have approximately a 20-25 years physical life expectancy, means that the PicoWave will provide a maintenance free service for this duration.

A battery life expectancy to switching cycles comparison table can be found under the sub-menu “Technical Data “.

Extraneous light independence

The PicoWave that recognises a “wave” or “approach” of the hand, can also be operated in full sunlight, because the clever technology can regulate light up to 150,000Lux, which equates to 1.5 times direct sunlight.

Self-calibrating

The optical system is self-calibrating. If you attach the optical proximity switch so that fixed objects remain in the detection area, they will be calibrated out after 10 seconds and you can use the switch as usual. Dust and other infrared layers are also calibrated out.

WEEE-Nr.: DE48986370